Publikationen - 2011-2020
- (2020) Crack growth behavior of a biomedical polymer-ceramic interpenetrating scaffolds composite in the subcritical regimen Eng. Fract. Mech.. 2020;231():
- (2020) Low-temperature degradation increases the cyclic fatigue resistance of 3Y-TZP in bending. Dent Mater. 2020;36(8): 1086-1095
- (2020) Crack growth rates in lithium disilicates with bulk (mis)alignment of the Li2Si2O5 phase in the [001] direction J. Non-Cryst. Solids. 2020;532():
- (2020) Temperature changes affect the rheological properties of a silicone-based and an epoxy resin-based root canal sealers. Aust Endod J. 2020;46(3): 394-399
- (2020) Do Contaminating Substances Influence the Rheological Properties of Root Canal Sealers? J Endod. 2020;46(2): 258-263
- (2020) Development of a hoop-strength test for model sphero-cylindrical dental ceramic crowns: FEA and fractography J Eur Ceram Soc. 2020;40(14): 4753-4764
- (2020) Rising R-curves in particulate/fiber-reinforced resin composite layered systems. J Mech Behav Biomed Mater. 2020;103():
- (2020) Sliding contact wear and subsurface damage of CAD/CAM materials against zirconia. Dent Mater. 2020;36(3): 387-401
- (2020) The Mechanical Performance of a Novel Self-Adhesive Restorative Material. J Adhes Dent. 2020;22(1): 47-58
- (2020) R-curve behavior of a short-fiber reinforced resin composite after water storage. J Mech Behav Biomed Mater. 2020;104():
- (2020) The occlusal wear of ceramic fixed dental prostheses: 3-Year results in a randomized controlled clinical trial with split-mouth design. J Dent. 2020;103():
- (2019) Mechanical and hydrolytic degradation of an Ormocer®-based Bis-GMA-free resin composite. Clin Oral Investig. 2019;23(5): 2113-2121
- (2019) New Approaches in Bonding to Glass-Ceramic: Self-Etch Glass-Ceramic Primer and Universal Adhesives. J Adhes Dent. 2019;21(3): 209-217
- (2019) Adhesion and interfacial characterization of biomimetically texturized lithium disilicate Int J Adhes Adhes. 2019;91(): 131-141
- (2019) In vitro lifetime of zirconium dioxide-based crowns veneered using Rapid Layer Technology. Eur J Oral Sci. 2019;127(2): 179-186
- (2019) Phase characterization of lithium silicate biomedical glass-ceramics produced by two-stage crystallization J. Non-Cryst. Solids. 2019;510(): 42-50
- (2019) Pitfalls of determining the elastic properties of stabilized zirconia with indentation methods Ceram Int. 2019;45(7): 9491-9496
- (2019) Factors influencing development of residual stresses during crystallization firing in a novel lithium silicate glass-ceramic. Dent Mater. 2019;35(6): 871-882
- (2019) Crack-healing during two-stage crystallization of biomedical lithium (di)silicate glass-ceramics. Dent Mater. 2019;35(8): 1130-1145
- (2019) Effect of sintering parameters on phase evolution and strength of dental lithium silicate glass-ceramics. Dent Mater. 2019;35(10): 1360-1369
- (2019) Fractographic analysis of lithium silicate crown failures during sintering. SAGE Open Med Case Rep. 2019;7():
- (2018) Fluorescent Labeling and 2-Photon Imaging of Mouse Tooth Pulp Nociceptors. J Dent Res. 2018;97(4): 460-466
- (2018) Practical and theoretical considerations on the fracture toughness testing of dental restorative materials. Dent Mater. 2018;34(1): 97-119
- (2018) Fracture anisotropy in texturized lithium disilicate glass-ceramics J. Non-Cryst. Solids. 2018;481(): 457-469
- (2018) Hygroscopic expansion of self-adhesive resin cements and the integrity of all-ceramic crowns. Dent Mater. 2018;34(8): 1102-1111
- (2018) Chairside CAD/CAM materials. Part 3: Cyclic fatigue parameters and lifetime predictions. Dent Mater. 2018;34(6): 910-921
- (2018) Resistance curves of short-fiber reinforced methacrylate-based biomedical composites Eng. Fract. Mech.. 2018;190(): 146-158
- (2018) Adhesive Failure of Lava Ultimate and Lithium Disilicate Crowns Bonded to Zirconia Abutments: A Prospective Within-Patient Comparison. Int J Prosthodont. 2018;31(3): 208-210
- (2018) Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs J Eur Ceram Soc. 2018;38(16): 5533-5544
- (2017) Antagonist wear of monolithic zirconia crowns after 2 years. Clin Oral Investig. 2017;21(4): 1165-1172
- (2017) ADM guidance-Ceramics: Fracture toughness testing and method selection. Dent Mater. 2017;33(6): 575-584
- (2017) Mixed-mode fracture toughness of texturized LS2 glass-ceramics using the three-point bending with eccentric notch test. Dent Mater. 2017;33(12): 1473-1477
- (2017) Chairside CAD/CAM materials. Part 2: Flexural strength testing. Dent Mater. 2017;33(1): 99-109
- (2017) Antagonist wear by polished zirconia crowns. Int J Comput Dent. 2017;20(3): 263-274
- (2017) ADM guidance-Ceramics: all-ceramic multilayer interfaces in dentistry. Dent Mater. 2017;33(6): 585-598
- (2017) Self-adhesive resin cements: pH-neutralization, hydrophilicity, and hygroscopic expansion stress. Clin Oral Investig. 2017;21(5): 1735-1741
- (2017) Optical profilometry versus intraoral (handheld) scanning. Int J Comput Dent. 2017;20(2): 165-176
- (2017) Adhesive Durability Inside the Root Canal Using Self-adhesive Resin Cements for Luting Fiber Posts. Oper Dent. 2017;42(6): E167-E176
- (2017) ADM guidance-ceramics: Fatigue principles and testing. Dent Mater. 2017;33(11): 1192-1204
- (2017) ADM guidance-Ceramics: guidance to the use of fractography in failure analysis of brittle materials. Dent Mater. 2017;33(6): 599-620
- (2017) Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. Dent Mater. 2017;33(1): 84-98
- (2017) Dental ceramics: a review of new materials and processing methods. Braz Oral Res. 2017;31(suppl 1): e58
- (2017) ADM research guidance papers. Dent Mater. 2017;33(9): 967
- (2017) Fractography of clinically fractured, implant-supported dental computer-aided design and computer-aided manufacturing crowns. SAGE Open Med Case Rep. 2017;5(): 2050313X17741015
- (2016) Fracture Rates and Lifetime Estimations of CAD/CAM All-ceramic Restorations. J Dent Res. 2016;95(1): 67-73
- (2016) Descriptions of crack growth behaviors in glass-ZrO2 bilayers under thermal residual stresses. Dent Mater. 2016;32(9): 1165-76
- (2016) Removal of Radioactively Marked Calcium Hydroxide from the Root Canal: Influence of Volume of Irrigation and Activation. J Endod. 2016;42(4): 637-40
- (2016) Fatigue behavior of Y-TZP ceramic after surface treatments. J Mech Behav Biomed Mater. 2016;57(): 149-56
- (2016) Spatial distribution of residual stresses in glass-ZrO2 sphero-cylindrical bilayers. J Mech Behav Biomed Mater. 2016;60(): 535-46
- (2016) The mechanical behavior of the material-tissue and material-material interface in dental reconstructions Int J Adhes Adhes. 2016;69(): 2-14
- (2016) Repair Bond Strength of Aged Resin Composite after Different Surface and Bonding Treatments Materials. 2016;9(7): 547-
- (2015) The distribution of human surfactant proteins within the oral cavity and their role during infectious diseases of the gingiva. Ann Anat. 2015;199(): 92-7
- (2015) Are resin composites suitable replacements for amalgam? A study of two-body wear. Clin Oral Investig. 2015;19(6): 1485-92
- (2015) Apical debris removal of CanalBrushes with different tip modifications. Quintessence Int. 2015;46(10): 853-60
- (2015) Effect of microparticulate silver addition in dental adhesives on secondary caries in vitro. Clin Oral Investig. 2015;19(7): 1673-81
- (2015) Permeation of intrinsic water into ethanol- and water-saturated, monomer-infiltrated dentin bond interfaces. Dent Mater. 2015;31(11): 1385-95
- (2015) Characterization of residual stresses in zirconia veneered bilayers assessed via sharp and blunt indentation. Dent Mater. 2015;31(8): 948-57
- (2015) Dental materials for primary dentition: are they suitable for occlusal restorations? A two-body wear study. Eur Arch Paediatr Dent. 2015;16(2): 165-72
- (2015) Bulk-fill resin composites: Polymerization properties and extended light curing Dent Mater. 2015;31(3): 293-301
- (2015) Fracture toughness mode mixity at the connectors of monolithic 3Y-TZP and LS2 dental bridge constructs J Eur Ceram Soc. 2015;35(13): 3701-3711
- (2014) The potential of novel primers and universal adhesives to bond to zirconia. J Dent. 2014;42(1): 90-8
- (2014) Antibacterial properties of metal and metalloid ions in chronic periodontitis and peri-implantitis therapy. Acta Biomater. 2014;10(8): 3795-810
- (2014) Bonding performance of universal adhesives in different etching modes. J Dent. 2014;42(7): 800-7
- (2014) Fracture toughness and cyclic fatigue resistance of resin composites with different filler size distributions. Dent Mater. 2014;30(7): 742-51
- (2014) Effect of double-layer application on dentin bond durability of one-step self-etch adhesives. Oper Dent. 2014;39(4): 416-26
- (2014) Restoration of endodontically treated teeth with major hard tissue loss - influence of post surface design on pull-out bond strength of fiber-reinforced composite posts. Dent Traumatol. 2014;30(4): 270-9
- (2014) Are linear elastic material properties relevant predictors of the cyclic fatigue resistance of dental resin composites? Dent Mater. 2014;30(4): 381-91
- (2014) Strengthening of dental adhesives via particle reinforcement. J Mech Behav Biomed Mater. 2014;37(): 100-8
- (2014) Mechanical fatigue degradation of ceramics versus resin composites for dental restorations. Dent Mater. 2014;30(4): 424-32
- (2014) Stress amplifications in dental non-carious cervical lesions. J Biomech. 2014;47(2): 410-6
- (2014) Self-adhesive resin cements: adhesive performance to indirect restorative ceramics. J Adhes Dent. 2014;16(6): 541-6
- (2014) Fracture of a veneered-ZrO2 dental prosthesis from an inner thermal crack Case Studies in Engineering Failure Analysis. 2014;2(2): 100-106
- (2014) In vivo shell-like fractures of veneered-ZrO2 fixed dental prostheses Case Studies in Engineering Failure Analysis. 2014;2(2): 91-99
- (2014) Sealing ability of different versions of GuttaFlow2in comparison to GuttaFlow and AH Plus Rev Sul-Bras Odontol . 2014;11(3): 224-229
- (2014) Mechanical fatigue degradation of ceramics versus resin composites for dental restorations (vol 30, pg 424, 2014) Dent Mater. 2014;30(10): 1204-1204
- (2014) Mechanical fatigue degradation of ceramics versus resin composites for dental restorations (vol 30, pg 424, 2014) Dent Mater. 2014;30(10): 1204-1204
- (2013) Factors involved in mechanical fatigue degradation of dental resin composites. J Dent Res. 2013;92(7): 584-91
- (2013) Influence of adhesive point dimension and splint type on splint rigidity--evaluation by the dynamic Periotest method. Dent Traumatol. 2013;29(3): 203-11
- (2013) Restoration of endodontically treated teeth with major hard tissue loss--bond strength of conventionally and adhesively luted fiber-reinforced composite posts. Dent Traumatol. 2013;29(5): 339-54
- (2013) Microstructure of veneered zirconia after surface treatments: a TEM study. Dent Mater. 2013;29(11): 1098-107
- (2013) Biomimetically- and hydrothermally-grown HAp nanoparticles as reinforcing fillers for dental adhesives. J Adhes Dent. 2013;15(5): 413-22
- (2013) Thermal-induced residual stresses affect the fractographic patterns of zirconia-veneer dental prostheses. J Mech Behav Biomed Mater. 2013;21(): 167-77
- (2013) Correlations between tooth mobility and the Periotest method in periodontally involved teeth. Quintessence Int. 2013;44(4): 307-16
- (2013) Influence of attachment and bone loss on the mobility of incisors and canine teeth. Acta Odontol Scand. 2013;71(3-4): 656-63
- (2013) Thermal-induced residual stresses affect the lifetime of zirconia-veneer crowns. Dent Mater. 2013;29(2): 181-90
- (2013) Cytocompatibility of Siloxane-Containing Vaterite/Poly(L-lactic acid) Composite Coatings on Metallic Magnesium Materials. 2013;6(12): 5857-5869
- (2013) Das NiTi-System F360 Erste Ergebnisse ZWR. 2013;122(11): 582-585
- (2013) NanoCare Plus SilverGold can eliminate Enterococcus faecalis from dentinal tubules Dental and Medical Problems. 2013;50(): 418-423
- (2013) NanoCare Plus SilverGold-<< can eliminate enterococcus faecalis from dentinal tubules Dental and Medical Problems. 2013;50(4): 418-423
- (2013) Maschinelle Wurzelkanalaufbereitung: Ist weniger wirklich mehr? Quintessenz. 2013;64(9): 1087-1094
- (2012) Correlations between photogrammetric measurements of tooth mobility and the Periotest method. Acta Odontol Scand. 2012;70(1): 27-35
- (2012) Vertical root fractures in crowned teeth: A report of 32 cases. Quintessence Int. 2012;43(1): 37-43
- (2012) A photoelastic assessment of residual stresses in zirconia-veneer crowns. J Dent Res. 2012;91(3): 316-20
- (2012) A novel approach for filling tunnel-prepared teeth with composites of two different consistencies: a case presentation. Quintessence Int. 2012;43(2): 93-6
- (2012) Rigidity evaluation of quartz-fiber splints compared with wire-composite splints. Dent Traumatol. 2012;28(1): 65-74
- (2012) Leucite-reinforced glass ceramic inlays luted with self-adhesive resin cement: A 2-year in vivo study. Dent Mater. 2012;28(5): 535-40
- (2012) Seven-year clinical performance of CEREC-2 all-ceramic CAD/CAM restorations placed within deeply destroyed teeth. Clin Oral Investig. 2012;16(5): 1413-24
- (2012) Fatigue behavior of dental resin composites: Flexural fatigue in vitro versus 6 years in vivo J Biomed Mater Res B Appl Biomater. 2012;100B(4): 903-910
- (2012) Comparing efficacy of plaque removal using professionally applied manual and power toothbrushes in 4- to 7-year-old children. Pediatr Dent. 2012;34(1): 61-5
- (2012) Zirconia posterior fixed partial dentures: 5-year clinical results of a prospective clinical trial. Int J Prosthodont. 2012;25(6): 585-9
